^{Connector Clamp Typ RDS 12 L}

RDS 12 L

2-part Version, designed for a quick and simple repair for pipes under working pressure.

- The overlapping feature allows an infinite number of clamps to be connected.

- The gasket is a moulded part, typically giving a tolerance range between 8 and 12mm depending on the size.

- Can cope with angular deflection of up to 3 degrees

- Can even cope with a circumferential gap or ring fracture of up to 2cm.

- Main body casting also has full side flanges where the bolts are fitted, so there are no lugs to snap or break off.

Body:

G G G 40

Gasket:

DVGW- tested according to W270

KTW- tested for drinking water

Bolts:

Hot dip galvanized steel bolts according to DIN 603 / 933 8.8

stainless steel bolts (A2) with CuNiSi nuts for an additional charge

Pipe DN	Tolerance mm	Length mm	Item-No. bolts galvanized	Item-No. bolts A2	Weight kg	Bolts
40	44 – 52	200	12040	12040V	4.3	M12x60
40	54 – 61	200	12041	12041V	4.3	M12x60
50	60 – 68	200	12050	12050V	4.7	M12x60
60/65/ 70	76 – 87	200	12065	12065V	5.5	M12x60
80	89 – 98	205	12080	12080V	9.8	M16x90
80	95 – 108	205	12081	12081V	9.8	M16x90
100	108 – 118	240	12100	12100V	12.2	M16x90
100	116 – 128	240	12101	12101V	12.2	M16x90
125	133 – 144	245	12125	12125V	17.6	M16x90
125	142 – 153	245	12126	12126V	17.6	M16x90
150	159 – 172	300	12150	12150V	25.6	M16x110
150	168 – 184	300	12151	12151V	25.6	M16x110
200	214 – 225	405	12200	12200V	39	M16x110
250	267 – 274	460	12250	12250V	56	M20x140
300	315 - 326	500	12300	12300V	83.5	M20x140

3-part Version, designed for a quick and simple repair for pipes under working pressure.